KE 100 - Premium Epoxy Grout: Stain-Resistance grout for interior & covered exterior floor & wall
KE-100 PREMIUM EPOXY GROUT
Stain-Resistance grout for interior & covered exterior floor & wall
PRODUCT DESCRIPTION
GRESBOND KE-100 is a Stain Resistance Epoxy grout for floors & Walls. It is a colour fast, water & chemical resistant & 100 % solid epoxy grout suitable for Ceramic tiles, Vitrified tiles, marbles and stones, especially in stain prone areas such as kitchens and washrooms (residential & commercial installations). It is a non-shrinking, fast curing efflorescence free grout. It is ideal for installation where high strength mildew joints are required.
Available in 1Kg and 5Kg packs.
FEATURES / BENEFITS
-
Colour-fast
-
Stain-Resistance
-
Easy to clean
-
Non-cracking or powdering
-
Complies with ISO 13007 standards
-
Available in range of 18 colours
SUBSTRATES
-
Vitrified tile
-
Ceramic tile
-
Glass Mosaic Tile
-
Granite
-
Marble
-
Agglomerates (Engineered Stones)
-
Precast Terrazzo tiles
APPLICATION
-
Residences
-
Kitchens
-
Bathrooms
-
Swimming Pools
-
Hospitals
-
Fountains
-
Showroom
-
Industrial Areas
COMPLIANCE
PACKAGING
Unit Net Weight :
| COMPONENT | Resin Mixed with Coated Filler | Hardener |
|---|---|---|
| 1 Kg. | 0.920 Kg | 0.08 Kg |
| 5 Kg. | 4.6 Kg | 0.4 Kg |
Data
Technical
Data
| PROPERTY / TEST METHOD | REQUIREMENT | TYPICAL VALUES |
|---|---|---|
| Abrasion resistance: ISO 13007 – 4: Clause 4.4; EN 12808 - 2 | ≤ 250 mm³ | Pass |
| Flexural strength under standard conditions: ISO 13007 – 4: Clause 4.1.3; EN 12808 – 3 | ≥ 30 N/mm² | 38 - 40 N/mm² |
| Compressive Strength under standard conditions: ISO 13007 – 4: Clause 4.1.4; EN 12808 – 4 | ≥ 45 N/mm² | 55 – 57 N/mm² |
| Shrinkage: ISO 13007 – 4: Clause 4.3; EN 12808 – 4 | < 1.5 mm/m | 0.6 – 0.8 mm/m |
| Water Absorption after 240 Minutes: ISO 13007 – 4: Clause 4.2; EN 12808 – 5 | ≤ 0.1 g | 0.015 – 0.040 g |
Note: The grout mortar conforms to ISO 13007–4 (RG).
Mix density of KE-100 grout is 1750 kg/m³
Grout Colors:
Snow White
Crema
Almond
Light Taupe
Champagne
Autumn Yellow
Sandalwood
Laurel Green
Aqua
Sea Blue
Turquoise Blue
Navy Blue
Brick Red
Chocolate
Coffee Bean
Light Grey
Dark Grey
Black
WORKING PROPERTIES AT 70° F (21° C)
| Pot life | Foot traffic | Heavy traffic |
|---|---|---|
| 45 minutes | 24 hours | 72 hours |
COVERAGE CHART (per 5kg unit)
Approx. sq. ft. coverage based on tile size and joint width:
| Tile Size X Thickness | 2 mm Coverage (Sq. Ft.) |
3 mm Coverage (Sq. Ft.) |
4 mm Coverage (Sq. Ft.) |
6 mm Coverage (Sq. Ft.) |
|---|---|---|---|---|
| 198X198X9 | 185 | 125 | 93 | 61 |
| 300X300X8 | 316 | 210 | 158 | 105 |
| 300X450X8 | 379 | 253 | 189 | 126 |
| 300X600X9 | 373 | 249 | 187 | 124 |
| 400X400X12 | 280 | 187 | 140 | 93 |
| 195X1200X9 | 314 | 209 | 157 | 105 |
| 600X600X9 | 560 | 374 | 280 | 187 |
| 800X800X9 | 747 | 498 | 374 | 249 |
| 600X1200X9 | 747 | 498 | 374 | 249 |
| 800X1600X9 | 996 | 665 | 498 | 336 |
| 1200X1800X9 | 1346 | 897 | 673 | 448 |
| 1200X2400X9 | 1495 | 996 | 747 | 498 |
*NOTE: Approximate sq. ft. coverage per 5 kg unit of Gresbond. Consumption may vary as per site conditions.
Important Site Checks for Gresbond KE-100 Grout Installation:
Colour Confirmation:
- Verify the grout colour matches the client's desired selection.
- Test a small area with actual tile/stone to check for colour absorption by the material, which may cause discolouration.
Movement Joints:
- Include proper movement and peripheral joints to accommodate movement in the tile/stone.
- Use a flexible grout or sealant for these movement joints
Grout Limitations:
- Gresbond KE-100 is a rigid epoxy grout and cannot accommodate movement in the tile/stone.
- Failure to incorporate movement joints can lead to cracks in the grout, tile or stone.
Sun Protection:
- When applying KE-100 in open areas like swimming pools, keep the work area covered and protected from sunlight for 7 days.
- Maintain the cover until the pool is filled with water.
Surface Preparation
- Before grouting, remove debris from grout joints and lightly sponge the tile surface to remove dust and dirt.
- Do not use acid cleaners on tiles. If acid cleaners were used, wash the area thoroughly with water before grouting.
- Substrate temperature must be between 60°F (16°C) and 90°F (32°C).
Mixing
- Empty Parts A and B of KE-100 Stain Resistance Grout into a clean mixing pail.
- Mix with a margin trowel or slow speed drill mixer until liquids are completely blended.
- Add Part C Filler Powder and mix to a uniform consistency.
- Gradually add the remaining filler powder until you reach a stiff mix suitable for grouting.
- Immediately pour the entire mixture onto a working area lined with a plastic sheet.
Application
- Use standard epoxy grouting techniques or a caulking gun to apply KE-100 Grout into the tile joints.
- Ensure all grout joints are completely filled.
- Remove as much excess material as possible before cleaning with a grout float.
- Do not leave excess grout on the tile surface.
Cleaning
- Remove excess grout from the tile faces with the edge of a grout float held at a 90° angle.
- Pull the float diagonally across the joints and tiles to avoid pulling out grout.
- After 30–45 minutes, scrub the surface of the tiles and joints with clean water and the provided scrubber to remove excess grout.
- Then, use a clean, thick white towel to remove any residue from the tiles.
- Perform a final cleaning within 24 hours using a normal soap detergent solution to remove any haze from the tiles.
Shelf Life & Limitations
- Shelf life: 1 year in factory-sealed containers stored at temperatures between 32°F(0°C) and 110°F (43°C).
- Light colored grout may darken slightly due to direct UV exposure. Consult GRESBOND technical team for specific exterior grouting recommendations.
- Not recommended for soft, polished marble or delicate glazed tiles.
- Maximum stain resistance is achieved 10 days after installation. Protect from acids and strong cleaners during this period.
- Adhesives/mastics, mortars and grouts are not replacements for waterproof membranes. Use Waterproof Membrane when required.
Maintenance
- Clean grouts regularly with a neutral pH soap and water solution or GRESBOND Tile Cleaner TC1 cleaner.
- Performance and durability depend on properly maintaining the installed area.
