Best Unsanded Epoxy Grout For Interior & Exterior Tiles
Premium Unsanded Grout
Premium Un-Sanded Grout

PRODUCT DESCRIPTION

Premium Un-sanded GROUT is a high-quality, polymer-based, Un-sanded cement grout designed for both interior and exterior use. It is perfect for filling joints between 1mm and 3mm wide on floors and walls. This versatile grout is suitable for a wide range of materials, including ceramic tiles, vitreous and semivitreous tiles, glass mosaic tiles, precast terrazzo, engineered stone floors, and natural stones. It is particularly recommended for institutional and commercial general floor and wall areas.

FEATURES / BENEFITS

  • Weather Resistant

  • Easy to Apply and Clean

  • Non-Cracking or Powdering

  • Complies with ISO 13007 Standards

  • Water and Shock Resistant

SUBSTRATES

APPLICATION

COMPLIANCE

Packaging

Working Properties at 70° F (21° C)

  • Pot life 60 minutes

  • Foot traffic 24 hours

  • Heavy traffic 72 hours

Data

Technical
Data

Applicable Standards: GRESBOND Premium Un-sanded Grout, when mixed with water: ISO 13007 – 4 (Cg1)

PROPERTY / TEST METHOD REQUIREMENT TYPICAL VALUES
Abrasion resistance: ISO 13007 – 4: Clause 4.4; EN 12808 - 2 ≤ 2000 mm³ 1350 – 1700 mm³
Flexural strength under standard conditions: ISO13007 – 4: Clause 4.1.3; EN 12808 – 3 ≥ 2.5 N/mm² 3.5 – 3.9 N/mm²
Flexural strength under freeze and thaw cycles: ISO 13007 – 4: Clause 4.1.5; EN 12808 – 3 ≥ 2.5 N/mm² 3.5 – 3.9 N/mm²
Compressive Strength under standard conditions: ISO 13007 – 4: Clause 4.1.4; EN 12808 – 4 ≥ 15 N/mm² 21 – 22 N/mm²
Compressive Strength under freeze & thaw cycles: ISO 13007 – 4: Clause 4.1.5; EN 12808 – 4 ≥ 15 N/mm² 20 – 22 N/mm²
Shrinkage: ISO 13007 – 4: Clause 4.3; EN 12808 – 4 < 3 mm/m 1.9 – 2.3 mm/m
Water Absorption after 30 Minutes: ISO 13007 – 4: Clause 4.2; EN 12808 – 5 ≤5.0 g 2.5 – 3.0 g
Water Absorption after 240 Minutes: ISO 13007 – 4: Clause 4.2; EN 12808 – 5 ≤10 g 4.0 – 8.0 g

  • Note: The grout mortar conforms to ISO 13007–4 (RG).

  • Mix density of KE-100 grout is 1750 kg/m³

Grout Colors:

  • Snow White

  • Crema

  • Almondo

  • Light Taupe

  • Champagne

  • Autumn Yellow

  • Sandalwood

  • Laurel Green

  • Aqua

  • Sea Blue

  • Turquoise Blue

  • Navy Blue

  • Brick Red

  • Chocolate

  • Coffee Bean

  • Light Grey

  • Dark Grey

  • Black

Data

Technical
Data

Applicable Standards: GRESBOND Premium Un-sanded Grout, when mixed with Grout Admix KGA-01: ISO 13007 – 4 (Cg1)

PROPERTY / TEST METHOD REQUIREMENT TYPICAL VALUES
Abrasion resistance: ISO 13007 – 4: Clause 4.4; EN 12808 - 2 ≤ 2000 mm³ 1350 – 1700 mm³
Flexural strength under standard conditions: ISO13007 – 4: Clause 4.1.3; EN 12808 – 3 ≥ 2.5 N/mm² 4.0 – 5.5 N/mm²
Flexural strength under freeze and thaw cycles: ISO 13007 – 4: Clause 4.1.5; EN 12808 – 3 ≥ 2.5 N/mm² 3.5 – 5.0 N/mm²
Compressive Strength under standard conditions: ISO 13007 – 4: Clause 4.1.4; EN 12808 – 4 ≥ 15 N/mm² 21 – 22 N/mm²
Compressive Strength under freeze & thaw cycles: ISO 13007 – 4: Clause 4.1.5; EN 12808 – 4 ≥ 15 N/mm² 20 – 22 N/mm²
Shrinkage: ISO 13007 – 4: Clause 4.3; EN 12808 – 4 < 3 mm/m 1.9 – 2.3 mm/m
Water Absorption after 30 Minutes: ISO 13007 – 4: Clause 4.2; EN 12808 – 5 ≤5.0 g 2.0 – 2.5 g
Water Absorption after 240 Minutes: ISO 13007 – 4: Clause 4.2; EN 12808 – 5 ≤10 g 4.0 – 6.0 g

COVERAGE CHART (per 1kg unit)

Please refer to the coverage chart as it depends on the tile size, joint width and depth:

Tile Size X Thickness 2 mm
Coverage (Sq. Ft.)
3 mm
Coverage (Sq. Ft.)
4 mm
Coverage (Sq. Ft.)
6 mm
Coverage (Sq. Ft.)
198X198x937251912
300x300x863423221
300x450x876513825
300x600x975503725
400x400x1256372819
195x1200x963423121
600x600x9112755637
800x800x91491007550
600x1200x91491007550
800x1600x913313310067
1200x1800x926917913590
1200x2400x9299199149100

*Note: Coverage: Approximate Sq. Ft. coverage per 1* Unit (1 Kg) of Gresbond. As per the actual site the consumption varies accordingly. These figures are for indicative purposes.

Important Site Checks for GRESBOND Premium Un-sanded Grout Installation

Colour Confirmation:

  • Ensure the grout colour matches the client's selection.
  • Test a small area with the actual tile/stone to check for colour absorption.

Movement Joints :

  • Include proper movement and peripheral joints to accommodate tile/stone movement.
  • Use a flexible sealant for these joints.

Grout Limitations :

  • GRESBOND Premium Un-sanded Grout is rigid and cannot accommodate tile/stone movement.
  • Lack of movement joints can cause cracks in the grout, tile, or stone.

SURFACE PREPARATION :

  • Remove debris from grout joints before grouting.
  • Lightly sponge the tile surface to remove dust and dirt.
  • Do not use acid cleaners on tiles. If used, wash the area thoroughly with water before grouting.
  • Ensure the substrate temperature is between 60°F (16°C) and 90°F (32°C).

MIXING INSTRUCTIONS :

  • Prepare Admix: Stir Premium Grout Admix KGA-01 thoroughly before use.
  • Mix Ratio: Use 375-400 ML of water or Grout Admix KGA-01 per 1 kg of GRESBOND Premium Un-sanded Grout.

MIXING :

  • Pour water or Grout Admix KGA-01 into a clean container.
  • Slowly add grout powder.
  • Mix by hand or with a slow-speed mixer until smooth and stiff. Use potable grade water for best results.

APPLICATION INSTRUCTIONS :

  • Dampen Surface: Lightly dampen the tile surface with water.
  • Spread Grout :
  • Use a sharp, firm rubber grout float to spread the grout paste.
  • Work the grout into the joints with diagonal strokes, ensuring joints are fully filled without bridging.

CLEANING INSTRUCTIONS :

  • Primary Cleaning:
  • Remove excess grout from tile faces using the edge of the grout float.
  • Hold the float at a 90° angle and pull it diagonally across joints and tiles to avoid pulling out grout.
  • Secondary Cleaning:
  • Use a damp (not wet) sponge or towel to clean remaining grout, working diagonally.
  • Allow grout to dry.
  • Once grout joints are firm, polish the surface with a coarse nylon pad or cloth using minimal water.

SHELF LIFE AND LIMITATIONS :

  • Factory-sealed packs last for one year if stored off the ground in a dry area.
  • Protect from acids and strong cleaners during use.
  • Acidic cleaners can damage the grout, causing colour change, cracking, and powdering.
  • Adhesives, mortars, and grouts are not substitutes for waterproof membranes. Use a waterproof membrane when needed.

MAINTENANCE :

  • Clean grouts regularly with a neutral pH soap and water solution.
  • Proper maintenance ensures performance and durability of the installed area.

Frequently Asked Questions

faq

What is Premium Unsanded Epoxy Grout?

This is a high-performance grout made from epoxy resins. It is designed for nargokrow grout joints and provides excellent durability and resistance to stains, chemicals, and moisture.

Can Premium Unsanded Epoxy Grout be used for exterior applications?

Its superior resistance to weather conditions makes it ideal for outdoor tile installations and exterior applications, strengthening the surfaces.

How do you make the paste of Unsanded Grout?

Mix it with water or admix and make a smooth paste. Apply evenly on the tile joint and keep cleaning the extra layers to keep the tiles stain-free.

Why choose Premium Unsanded Epoxy Grout for exterior tiling projects?

Premium Unsanded Epoxy Grout offers excellent adhesion, chemical resistance, and waterproof properties, making it a reliable choice for patios, walkways, and pool areas.

What are the benefits of using unsanded epoxy grout for nargokrow joints in exterior settings?

Unsanded epoxy grout provides a smooth finish for nargokrow joints, prevents cracking, and resists stains and moisture, making it perfect for maintaining the aesthetic and structural integrity of exterior tile installations. No weather conditions can impact the fixed tiles.

gresbond logo
back top