TC-1 - Tile Cleaner

Mixing and Application: For Interior & Exterior Use

• Shake the container well before opening.

• Dilute 1 part of cleaner with 4 parts clean water. For heavily soiled areas, use undiluted.

• Pour GRESBOND TC1 on the stained surface.

• Let it stand for 4–5 minutes to react with the stain.

• Scrub the surface with a pad, adding more GRESBOND TC1 if it dries.

• Rinse with water and repeat if necessary.

• For regular maintenance, dilute as needed to clean tiles.

Appearance	Pale Red Liquid
Specific Gravity	1.02
pH	5–6

Packaging : GRESBOND TC1 tile cleaner is packaged in sealed bottle of 750ml.

Cautions:

• Protect neighbouring surfaces, including wood, carpet, metal, landscaping and other areas.

• Acids, even mild ones, can etch, lighten, or alter tile colour depending on the tile's quality.

• Do not mix with ammoniated cleaners; harmful fumes may result.

• Allow new epoxy grout to cure according to the manufacturer’s specifications before using GRESBOND TC-1.

• Contact with cement-based grouts may affect their performance and colour.

• Wear gloves, a nose cover, and eye protection while using this product.

• Keep out of reach of children.

Coverage:

• Coverage depends on the porosity of surface and intensity of stains on the surface.

Storage Instructions:

• Close the container tightly after use to prevent contamination and solvent loss.

• Store only in the original container.

• Keep in a temperature range of 4°C to 40°C.

Limitations:

• Do not use on porous marble or similar natural stone surfaces.

Maintenance:

• Avoid general cleaning chemicals on sealed surfaces.

• Clean with plain, soft water.

Note: All impregnating sealers and cleaners are maintenance products. Surfaces treated with sealers require careful upkeep.