VX-2 is a high-performance, polymer-modified, white cement-based adhesive for low-porosity tiles (vitrified, semi-vitrified) and natural stones, suitable for both interior and exterior floors, and interior walls. It provides excellent bond strength, water resistance, and ease of use, ideal for showers, wet areas, and swimming pools. VX-2 is perfect for renovations, allowing for quick tile-over-tile installations, and is suitable for mosaics, terrazzo, and light-colored natural stones.
Confirms to IS 15477: 2019 Type 2T “Adhesives for use with Ceramic, Mosaic and Stone Tiles”
Note: Not recommended for direct use onto gypsum plaster (wall finishes), paint or metal. Not suitable for tiles and stones with mesh backing.
Superior Bond Strength: Exceeds EN & ISO C2TE classification for shear bond strength, ensuring a durable and long-lasting installation
Versatile Application: Suitable for most common substrates like concrete, masonry surfaces, existing tiles, and even terraces.
Water Resistant: Ideal for wet areas like showers, bathrooms, and swimming pools.
Easy to Use: Single-component formula requires only the addition of water for a smooth, trowelable
Smooth application & Curing: Easy mixing, smooth application & better workability and achieves full strength in approximately 14 days.
Economical: Cost-effective solution for various tiling projects.
Property | Value |
---|---|
Density | 1.7 kg / litre approx. |
Pot Life | 120 Minutes Approx |
Open Time | 30 minutes Approx |
Adjustability | 30 minutes Approx |
Setting Time | Approx. 1 Day |
Full Strength | Approx. 14 Days |
Tensile Strength | >1.20 N/mm² |
Shear Strength | >1.25 N/mm² |
Property: Test method | Requirement | Typical Values |
---|---|---|
Tensile Adhesion | ||
Wet Conditions - Annex A (Clause 5.1) | Minimum 1.00 N/mm² | 1.15-1.25 N/mm² |
Dry Condition - Annex A (Clause 5.1) | Minimum 1.00 N/mm² | 1.15-1.25 N/mm² |
Shear Adhesion | ||
Dry Condition – Annex B (Clause 5.2) | Minimum 1.25 N/mm² | 1.30–1.35 N/mm² |
Heat Ageing - Annex B (Clause 5.2) | Minimum 1.00 N/mm² | 1.05-1.15 N/mm² |
Wet Condition – Annex B (Clause 5.2) | Minimum 1.00 N/mm² | 1.10-1.20 N/mm² |
Slip Resistance | ||
Slip resistance – Annex B (Clause 5.2) | ≤ 0.5 mm | 0.35 mm |
CERTIFICATIONS :
Confirms to IS 15477: 2019 Type 2T “Adhesives for use with Ceramic, Mosaic and Stone Tiles”
Confirms to EN 12004 / ISO 13007 and is an improved cementitious adhesive (C2) with slip resistance (T) and Extended Open time (E) of class C2TE
PACKAGING : 20 kg bag (Available in Grey and White (With the name of VX-1))
COVERAGE :
Approx. 55–60 sq. ft. per 20 kg bag (using a 6mm x 6mm notched trowel for a 3mm bed)
1.2 kg/m² per mm of thickness (coverage may vary)
Disclaimer: This technical data sheet is provided for informational purposes only. The information contained herein is based on our technical knowledge and experience. However, due to variations in field conditions, we recommend conducting preliminary tests to ensure product suitability for a specific application.
Ensure a clean, sound substrate between 40°F (4°C) and 104°F (40°C), free from dirt, oil, grease, paint, laitance, and sealers.
Level uneven surfaces with a screed or plaster.
Dampen dusty or dry concrete before installation. New concrete must be cured for at least 28 days.
Incorporate expansion joints matching substrate joints.
Use Gresbond PUA-100 for wood substrates.
Pour clean water into a mixing bowl.
Gradually add VX-2 powder (5 - 5.5 liters per 20 kg).
Mix until smooth and trowelable consistency. Let it slake for 5 minutes.
Remix before applying with the appropriate trowel size.
For large format tiles or exterior applications, consult Gresbond technical services.
Apply adhesive with the flat side of the trowel, ensuring good contact.
Use the appropriate notched trowel to ensure full tile bedding.
Comb additional adhesive with the notched trowel to cover the backside of the tile. Spread only enough for 10 minutes of working time.
Back-butter large format tiles for better support.
Firmly press tiles into the wet adhesive and adjust level.
Check for complete adhesive coverage on the back of the tile periodically.
Use spacers for grout joints as per recommendations. Remove spacers after the adhesive sets.
If the adhesive skins over, remove and replace with fresh mix.
For some natural stones, apply suitable sealers on all sides.
Clean excess adhesive from tiles and joints while fresh.
Always add powder to water. Do not add excess water.
Do not add sand or cement on-site.
Not recommended for wet screeds or uneven surfaces exceeding 12mm.
Protect from rain and foot traffic for 24 hours.
Leave gaps between tiles and fill with Gresbond tile grout.
For installations exceeding 3 meters in height, consult a professional about additional mechanical fasteners.
Not suitable for gypsum plaster, fiber cement boards, plywood, metal, plastics, or deformable surfaces. Use Gresbond PUA-100 for such applications.
Trowel Selection: The size of the notched trowel will depend on the size and type of tile you're installing. For larger tiles or uneven substrates, a bigger notch size is recommended to ensure full coverage.
Weather Conditions: While VX-2 can be used for exterior applications, extreme heat or cold can affect drying times. Always check the weather forecast and adjust working practices accordingly.
Substrate Preparation: Proper surface preparation is crucial for a successful tile installation. Don't underestimate the importance of a clean, sound, and level substrate.
Working Time: Once mixed, VX-2 has a working time of about 15–20 minutes. It’s important to work efficiently and avoid mixing large quantities at once to prevent wastage.
Begin grouting after 24 hours at 70°F (21°C) using Gresbond's KE-100 series grout or unsanded grout.
By following the instructions in this data sheet and considering these additional tips, you can achieve a professional and long-lasting tile installation using VX-2 Type 2T Tile Adhesive.
VX2 Tile Adhesive is a premium chemical compound that securely fixes tiles on walls and floors, ensuring a robust and lasting bond. It is specifically formulated for Vitrified Tiles and is available in white.
VX2 Tile Adhesive is perfect for bathroom tiles due to its water-resistant and strong adhesive properties.
Apply VX2 Tile Adhesive evenly to the wall with a trowel, then press the tiles firmly into place for a secure bond. If you are using large-format tiles, make sure to apply the adhesive paste to them.
Yes, It is ideal for vitrified light-colored floor tiles. It offers a durable bond that can withstand foot traffic and daily wear.
It can be used on concrete, cement, plaster, and even existing tiles, making it a versatile choice for any project.
It typically sets in 24 hours, but this can vary depending on the conditions and tiles used.
It provides better adhesion, flexibility, and water resistance than traditional cement. Tiles fixed with traditional cement may lose after some years, but VX-2 ensures durability in the long run.
The price of VX2 Tile Adhesive varies based on quantity. It starts from Rs 300 per bag. Check local retailers or dealers for accurate pricing.
It also works like glue for minor tile repairs, ensuring a reliable bond for loose or damaged tiles. DIY people or homeowners can also use this adhesive to repair minor tile issues.
VX2 Tile Adhesive's strong chemical composition ensures tiles stay in place, preventing shifts and maintaining durability.